Product Features
- Widened Base, Lowered Center of Gravity
- Y-Axis Rail Top-Mounted, Stable Structure
- Z-Axis Four-Guide-Rail Design, Stronger Toughness
Technical Specifications
| Item |
Unit |
GLM-4016HL |
| System |
Control System |
- |
FANUC |
| Rapid Traverse Speed |
mm/min |
12000/12000/12000 |
| Cutting Feed Speed |
mm/min |
1-10000 |
| 3-Axis Rated Power |
Kw |
6.0/7.0/7.0 [Note①] |
| 3-Axis Rated Torque |
N.m |
38.0/30.0/30.0 [Note①] |
| Worktable |
T-Slot Specs |
- |
9-28-180 |
| Worktable Size |
mm |
4200*1400 |
| Doorway Width |
mm |
1600 |
| Max Worktable Load |
Kg |
5500 |
| Stroke |
3-Axis Stroke |
mm |
4200*1600*800 |
| Spindle Nose to Worktable Distance |
mm |
1250-950 |
| Spindle |
Spindle Power |
Kw |
15-18.5 |
| Max Spindle Speed |
rpm |
6000 (Belt)/8000 (Belt)/10000 (Direct Drive) |
| Spindle Taper Hole |
- |
BT50 |
| Transmission |
Screw Diameter/Pitch |
mm |
Φ80D16/Φ63D16/Φ50D10 |
| Linear Rail Brand/Type/Width |
- |
PMI Roller 55mm/55mm (Rectangular rail ) [Note②] |
| Guide Rail Qty/Slider Qty |
Pcs |
2-16/2-5 (Rack) |
| Tool Magazine |
Tool Capacity |
Pcs |
24 [Note④] |
| Drawbar Angle |
° |
45° |
| Max Tool Diameter |
mm |
Φ110 (Full)/Φ210 (Empty Adjacent Tool) |
| Max Tool Length/Weight |
mm/kg |
350/15 |
| Tool Change Time |
s |
2.2 |
| Configuration |
Auto Chip Removal |
- |
Rear Flush |
| Auto Lubrication System |
- |
Thin Oil Lubrication |
| Cabinet Cooling |
- |
Heat Exchanger |
| Accuracy |
Positioning Accuracy (300mm) |
mm |
0.008/0.008/0.012 |
| Repeat Positioning Accuracy (300mm) |
mm |
0.006/0.006/0.008 |
| Others |
Air Flow/Pressure |
- |
Flow 150(L/min)/Pressure 6(bar) |
| Total Power |
Kw |
30 |
| Machine Weight |
Kg |
23000 |
| Machine Overall Size (L*W*H) |
mm |
9700*3470*3500 |
Standard Configuration:
Double-row + Chain-type Tool Magazine, Spindle Oil Cooler, Water Gun, Air Gun, Spindle Shroud, Spindle Ring, Centralized Lubrication, Air Source Treatment, Oil-Water Separator, Heat Exchanger, Counterbalance Cylinder
Optional Configuration:
Mitsubishi/New Generation System, Hollow Spindle, Cabinet Air Conditioner, 4-Axis/5-Axis, Column Reinforcement, Full Enclosure, Manual/Auto Rotary Head, Side Head Magazine, Internal Tool Cooling, Fixtures, Clamps
Product appearance and configuration are subject to technical updates (not lower than current specifications), without prior notice. The actual purchase technical agreement shall prevail.
There are many gantry machine models; the above is only part of our company’s models. For unlisted specifications, please consult the official website or the corresponding customer manager.
Note①: 3-axis power/torque is based on FANUC. For details of Mitsubishi/New Generation systems, please consult the corresponding customer manager.
Note②: For guide rails, HWIN/Rexroth/THK (same specifications) may be substituted, without prior notice.
Note③: Z-axis can be optionally motorized.
Note④: Tool magazine capacity can be optionally 30T.
